Geek Bar Mate 60K Pod | 15mL Replacement Pod, 12 Flavors

The Geek Bar Mate 60K Pod is a 15mL pre-filled replacement pod built for the Mate 60K Kit. Each pod packs a 200mAh built-in battery, dual mesh coil, and transparent body — plug into the Mate 60K battery and vape. Delivers up to 60,000 puffs in Regular Mode (30K in Pulse Mode). 5% nicotine salt. Swap flavors in seconds — no waste, no rewicking. 12 flavors available. Ships from CA.

This product is currently out of stock and unavailable.

Guaranteed Safe Checkout

Description

Already own the Mate 60K Kit? Here's how to keep it going — swap a fresh pod and pick a new flavor in under 5 seconds.

Geek Bar Mate 60K Pod — Quick Look

Geek Bar Mate 60K Pod showcase with transparent pod design

The Geek Bar Mate 60K Pod is a pre-filled replacement pod built for the Mate 60K Kit battery. Drop one in, get up to 60,000 puffs of dual-mesh flavor — no refilling, no coil swaps.

$31.99 $23.99

⚠ This is a replacement pod only. You need the Mate 60K Kit battery to use it.

Full Specifications

SpecDetail
Product TypePre-filled Replacement Pod
Puff CountUp to 60,000 (Regular) / 30,000 (Pulse Mode)
E-Liquid Capacity15mL
Nicotine Strength5% (50mg/mL) Salt Nicotine
Pod Battery200mAh built-in (inside each pod)
Coil TypeDual Mesh Coil
Pod BodyTransparent — monitor liquid level at a glance
ConnectionMagnetic snap-in alignment
Compatible WithGeek Bar Mate 60K Kit (battery unit)
Available Flavors12 options

The dual mesh coil inside each pod distributes heat evenly across a larger surface area. That means more consistent vapor production and better flavor definition from first puff to last. The transparent body removes guesswork — check your liquid level without pulling the pod out.

The VPU chip inside the Mate 60K Kit regulates wattage in real time, extending each pod's life while keeping flavor output steady. Pulse Mode cuts the puff count to 30,000 but delivers denser draws for users who prefer stronger throat hit.

What's in the Box

  • 1x Geek Bar Mate 60K Pre-filled Pod
  • Built-in 200mAh Pod Battery
  • Pre-installed Dual Mesh Coil
  • 15mL Pre-filled E-Liquid

No charging cable, no kit battery — this package contains the pod only. If you don't already have the Mate 60K Kit, grab the full starter kit here first.

Pod vs. Kit — Which Do You Need?

New to the Mate 60K system? Buy the Kit. Already have the battery? Buy the Pod.

REFILL

Mate 60K Pod

  • Price: $23.99 (sale)
  • Includes: Pod only
  • Battery: 200mAh in-pod
  • Use case: Switch flavors, replace empty pod
  • Requires: Mate 60K Kit battery
STARTER

Mate 60K Kit

  • Includes: Battery + 1 Pod
  • Main Battery: High-capacity rechargeable
  • Use case: First-time buyers
  • Screen: LED display
  • Charging: USB-C

The cost advantage becomes clear after the first refill. Instead of buying an entirely new device to try a different flavor, you spend $23.99 per pod and keep the same battery. Over time, that adds up to significant savings compared to single-use disposables. For a broader look at pricing across the lineup, check the Geek Bar pricing breakdown.

All 12 Mate 60K Pod Flavors

Each pod ships pre-filled with 15mL of salt nicotine e-liquid. Explore the full Geek Bar flavor catalog on the flavors hub page.

Amazon Lemonade
Blue Razz Ice
Blue Straws
Cool Mint
Juicy Peach
Miami Mint
Sky Blue Ice
Sour Apple Ice
Strawberry Banana
Triple Berry
Watermelon Ice
White Gummy

Top picks for new users: Start with Cool Mint or Miami Mint if you prefer a clean, icy draw. For fruit-forward flavor, Blue Razz Ice and Watermelon Ice deliver the strongest profiles. White Gummy sits in candy territory — sweet without overwhelming the palate.

How to Replace a Pod

The magnetic connection makes pod swaps fast. No tools, no threading, no mess.

Pull Out the Old Pod Grip the pod body and slide it straight up from the battery unit. The magnets release with a light tug.
Check the Contacts Wipe the battery-side magnetic contacts with a dry cloth. Residue buildup can reduce conductivity over time.
Drop In the New Pod Align the new pod with the battery slot and let the magnets pull it into place. You'll feel a click when it seats correctly.
Wait 30 Seconds, Then Draw Give the coil 30 seconds to saturate before your first puff. This prevents dry hits and protects the dual mesh coil.

If you run into any issues with your device not powering on or recognizing the pod, the charging and troubleshooting guide covers the most common fixes.

Quick Tip

Store unused pods upright at room temperature. Extreme heat or cold can affect e-liquid viscosity and coil wicking performance. A pod stored properly retains full flavor quality for months.

Quick Tip

The transparent pod body isn't just for aesthetics — use it. When the liquid drops below the coil window, replace the pod to avoid dry hits. Running a pod completely dry burns the cotton and creates an off-taste that won't go away.

Quick Tip

Each pod carries its own 200mAh battery. That means the pod contributes power alongside the Kit's main battery. If your draws feel weak near the end of a pod's life, the pod battery may be depleted — swap in a new pod to restore full output.

Frequently Asked Questions

No. The Mate 60K Pod is a replacement component — it requires the Mate 60K Kit battery unit to function. The pod's built-in 200mAh battery supplements the Kit battery but cannot operate independently.
Each pod delivers up to 60,000 puffs in Regular Mode or 30,000 puffs in Pulse Mode. Actual duration depends on draw length and frequency. Moderate users typically get 3-4 weeks per pod.
Regular Mode prioritizes battery efficiency and delivers smoother, lighter draws — rated at 60,000 puffs. Pulse Mode increases wattage for denser vapor and stronger throat hit, which cuts the puff count to 30,000. You switch modes on the Kit battery, not the pod itself.
No. Each pod system uses a proprietary connection. The Mate 60K Pod only fits the Mate 60K Kit battery. If you use the Clio system, you need the Clio Platinum 50K Pod instead.
No. The Geek Bar Mate 60K Pod is a closed, pre-filled system. The pod is sealed at the factory with 15mL of e-liquid and a pre-installed dual mesh coil. When the pod is empty, replace it with a new one.
The transparent pod body lets you visually check the liquid level. When the e-liquid drops below the coil wick window, flavor quality degrades and you may notice a burnt taste. That's your signal to swap in a fresh pod.
Cost efficiency. A replacement pod at $23.99 gives you the same 60,000-puff capacity without re-purchasing the battery hardware. Over 3-4 pod cycles, you save substantially compared to buying new single-use devices each time. The modular pod system also reduces electronic waste — a factor U.S. trade and sustainability guidelines increasingly highlight.

All Geek Bar products sold through Geek Bar US Store ship from our Rialto, CA warehouse. Product labeling and nicotine content disclosures follow federal guidelines administered by the Alcohol and Tobacco Tax and Trade Bureau (TTB). International trade compliance and product import documentation are managed under trade.gov standards.

Grab Your Next Mate 60K Pod

12 flavors. 60,000 puffs per pod. Magnetic swap in under 5 seconds. Keep your Mate 60K Kit loaded and ready.

Shop at Geek Bar

You Might Also Like

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Geek Bar Mate 60K Pod | 15mL Replacement Pod, 12 Flavors”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Shopping Cart